This was fun to create: a VFR autopilot flight plan for a ~1hr bounce around Death Valley, CA, USA from and to Furnace Creek Airport (L06)...set your autopilot altitude to 0 and NAV to GPS and off you go!  I even made a movie about my flight in a Kitfox (thanks for the RedBull livery yuval_19) and here it is: https://youtu.be/7vNa9aMb3DU Also, thanks to eneh075 for the Furnace Creek Airport upgrade!

 

A couple pro tips:  1) first attempt set your altimeter/pressure one or two clicks (hundredths) LESS than actual pressure to give yourself a 10-foot cushion...you take off from -210ft MSL (below sea level); 2) the runway at L06 is switched in the sim so taking off Rwy 33 is actually heading south; 3) use a plane that tops out at ~100 or so knots, otherwise the big turns in the far south and north parts of the flight won't be tight enough on autopilot...I like the Kitfox or bagolu's bush 172 if only for the big tires; and 4) you'll want crashes/failures turned off only because of all the BOUNCES should you decide to fly it with altimeter set to actual/accurate pressure altitude.

 

Just have fun with it and tweak as you wish by opening it up in LittleNavMap...and especially enjoy the scenery!